How to clean all types of cell phone casing

It is no secret that the cellphones we hold everyday can be infested with lots of germs and viruses. Even cell phones can carry 10 times more germs than a toilet seat.

In the midst of the outbreak of the corona virus, cleaning up mobile phones has often been recommended. But don’t forget to clean the casing that protects the cellphone too.

Whether it’s casing made of plastic, silicone or leather, all have their own cleaning methods so as not to damage the material. Here’s how to clean all types of casings.

Plastic

Corona virus can survive on plastic surfaces for up to nine days. So for those of you who use hard plastic casing must clean it thoroughly.

Fortunately, plastic is a fairly tough material, so it can be cleaned with a slightly hard cleaner such as bleach. But if you feel uncomfortable using bleach, you can use the instructions to clean the silicone case below.

To clean the plastic cellphone casing, prepare bleach, water, sponge / cloth / toothbrush, and gloves. Bleach can irritate the skin and lungs, so use gloves and open the window for optimal air circulation.

Mix one tablespoon of bleach into one cup of water. Soak the casing in the solution for 5-10 minutes. If your case has stubborn stains, you can soak it for longer.

Rub the casing using a sponge or cloth to remove all dirt and stains. If there are areas that are difficult to achieve, you can use a toothbrush.

Rinse the casing thoroughly to remove the bleach solution. Dry using a towel or tissue then air out for 30 minutes before replacing it.

Read also: how do i know if my text message was read android

Rubber and Silicon

Rubber and silicone are more fragile than hard plastic, so you have to use a softer cleaner. You can use dishwashing soap, but if you want to get rid of stains and yellowish color, you can use baking soda afterwards.

Before starting, prepare dishwashing soap, water, sponge / cloth / toothbrush and baking soda (optional). Dissolve the soap in a bowl of warm water and stir.

Soak a sponge or cloth into the solution and use it to rub the case. Use a toothbrush to clean the hard to reach parts.

Optional: if stains and dirt have not been lifted, sprinkle baking soda over the casing and scrub with a wet toothbrush.

Rinse the casing thoroughly until it is free of soap and baking soda. Wipe dry using a towel or tissue then dry for 30 minutes before replacing it.

Keep in mind, do not boil the silicone casing or put it into a dishwasher like cooking utensils made from silicone. This method can make the size of the casing shrink.

Wood

Certain liquids can damage wood or wood layers. But the following methods are safe enough to be used to clean all types of wooden casings.

For this method you need water, vinegar, spray bottles and cloth. Fill the spray bottle with two parts water and one part vinegar, then shake until blended.

Spray the solution into the casing, then wipe using a slightly damp cloth. Try not to spray too much vinegar on the casing.

Wipe using a tissue or dry cloth to remove the remaining solution in the casing.

Skin

Leather is the most fragile material among all types of casing. This casing is sensitive to oil, sunlight, heat and humidity.

You can use a skin cleanser to clean this type of casing. But if you don’t have a skin cleanser, this method is an easier and cheaper alternative. But keep in mind that the skin can change color a little after the cleansing process.

Before starting to prepare warm water, soft hand washing soap and cloth. Mix warm water and hand washing soap in a bowl. Use your instincts to determine the proportions.

Do not rub the solution directly into the casing because the skin is very sensitive to water stains. Dip the cloth in the solution then squeeze it until it feels a little wet.

Use the damp cloth to wipe the casing clean. Dry using a clean and dry cloth or tissue to remove any residual water.

Powerful Way to Increase Android Phone Performance

Mobile phones have become a necessity for everyone to carry out daily activities. Various interesting applications so the choice of mobile users in doing the routine. However, the application actually makes the cell phone memory full to slow down cell phone performance.

Too many applications running is indeed one of the causes of slowing the performance of mobile phones, especially Android. If this continues, it is likely that cell phones will have a shorter lifespan. Here are some tips that we have summarized from wikiahow.com as a solution.

1. Uninstall applications that are not too important

The use of too many applications is one of the causes of your cell phone’s slowness. More and more applications that you install actually make your internal memory and RAM full without realizing it. Select the application that is important to use, then uninstall all applications that are not needed.

2. Disable Bloatware

Bloatware or factory default applications can sometimes not be removed. But we can disable it to prevent the use of RAM behind the scenes. The way is to enter the phone settings and enter the application section and select the application that you want to deactivate.

3. Delete Widgets That Are Not Used

Too many widgets also make your phone slow down. To overcome this, you only need to use wallpaper, then you can choose a wallpaper with colors that tend to be dark. This is rumored to be able to help the performance of cellphones become faster.

4. Turn off the Data Connection when Not in Use

The true data connection consumes faster battery power, and even slows down phone performance. To overcome this, simply turn off the data connection on the cell phone when it is not really needed.

5. Don’t Use Animation

The use of animation on cell phones does spoil the eyes, but it consumes enough RAM. Animation can be disabled via the screen settings.

6. Install the Third-Party Booster Application

Many myths say the use of third-party booster applications actually slow down the performance of mobile phones, but not all of them are like that. Google Play Store provides several choices of booster applications such as Clean Master which has various features to help optimize your phone’s performance. In addition, there are a variety of applications with a variety of different speed-up features such as DU Speed Booster, CCleaner and others. In fact, some mobile phones have brought the application with the manufacturer.

7. Turn off or reduce the auto-sync feature

Some Android users enter many different accounts to synchronize on several applications. But unconsciously, this feature consumes enough RAM and the battery is no exception. To stop it, just enter the phone’s settings and look for the Auto-Sync option (usually under the account options). But not all applications that have an auto-sync feature can be turned off via cellphone settings. One of them is Facebook, which must be turned off through the settings in the application.

8. Reset Factory Settings

This method is the “ultimate weapon” for mobile phones that experience lag that can make users furious. Through a factory reset, your cellphone will return to factory default settings. However, this does not mean to make the condition of the cell phone really improve again as it was when you first bought the cellphone, it just becomes “good enough” to use.